Danger Still Exists Even After The Fire Is Extinguished

9/28/2020 (Permalink)

Debris Left After A Fire Is Still Dangerous

After a structure fire, restoration contractors are often on scene within hours to perform emergency services.  This usually begins with boarding up windows and doors and covering holes in the roof cut by the fire department. This is intended to protect properties from further damage as well as prevent unauthorized entry, theft, or spoiling of evidence. However, what many people may not realize is that boarding-up a fire damaged structure can create an extremely hazardous environment.

Although the flames have been extinguished, the smoke has cleared, and the fire department removed the yellow tape, the fire scene isn’t as safe as one might think. Toxic volatile organic compounds (VOC’s) created by the vast array of materials and products that, after being burned, are now in a state of off-gassing, saturating the indoor air with poisonous gases and particulates. The combination of the lack of ventilation after a board-up and the toxicity of the combustion byproducts created classifies this environment as immediately dangerous to life and health (IDLH). The National Institute for Occupational Safety and Health (NIOSH) states that a respiratory hazard exists when a toxic contaminant is present in the air at a sufficient concentration to cause harm when inhaled. The damage may occur immediately, or it may take days, weeks, months, or years for effects to surface.

The types and quantities of materials and products that combust, their chemical reactions, heat, time, and other factors, make each post-fire environment unique.  The vast array of toxic chemicals, VOC’s, and particulates are limitless and exposure to them can have immediate and/or long-term health effects.  Fire investigators know all too well the dangers of post-fire environments and many are sickened.  

One example of this occurred when a fire chief in California walked through a residential fire to assess the damage. A short time later, as he was returning to the fire station, he became ill and his aide transported him to a local hospital. The hazardous material response team was called to the scene and located several glass containers of a substance later identified as liquid sodium cyanide. The chief was subsequently transported to a medical facility equipped with a hyperbaric chamber for treatment and fully recovered. Physicians and investigators eventually determined that he had inhaled near-lethal doses of sodium cyanide from a jewelry refinishing business that was operated from the home. ⁽¹⁾

Restoration contractors face similar dangers in structure fire settings, where they may spend days performing emergency services, mucking out debris, estimating, and inventorying personal property.

Smoke, Toxic Gasses, & Chemicals

Considering that cigarette smoke alone contains over 7,000 chemicals, with 70 identified as cancer-causing, the products and materials that burn in a structure fire produce innumerable toxins. These products may include plastics, fiberglass, fabrics, fire retardants, electronics, pesticides, cleaning solutions, automotive fluids, solvents, chemicals used to manufacture illicit drugs and a host of others.

Currently, the EPA has over 85,000 chemicals registered in its inventory of substances that fall under the Toxic Substances Control Act and approximately 2,000 new chemicals are introduced each year.⁽²⁾ The Chemical Abstracts Service is the world’s authority on chemical information and it has over 100 million registered chemical substances in its registry.⁽³⁾  These chemicals are combined in more than 7 million mixtures formulations that are found in homes and buildings across the U.S.⁽⁴⁾ The majority of the chemicals currently in commercial use haven’t been evaluated.⁽⁵⁾

Some of the most toxic chemicals and gases found in smoke include: hydrogen cyanide, phosgene, dioxins, furans, sulfur dioxide, PCB’s, hydrochloric and sulfuric acid, and arsenic. Other toxins may include benzene, lead, chromium, and other metals, toluene, acrolein, mercury, formaldehyde, phenol, styrene, and polycyclic aromatic hydrocarbons.

To give you an idea of how toxic some of these chemicals are, phosgene and hydrogen cyanide were used in World War I as chemical warfare agents, resulting in thousands of casualties. Both hydrogen cyanide and phosgene are commonly found in structure fire smoke. 

Dioxins – The Worst of the Worst

Restorers are well aware of hazardous materials such as asbestos, lead, and mold, but few realize how toxic  smoke particulates and soot can be. The dioxin named 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) has been called the most toxic man-made compound on Earth.⁽⁶⁾ Scientists say it is exceeded in toxicity only by radioactive waste.⁽⁷⁾   Dioxins are formed when products containing carbon and chlorine are burned, such as plastics containing PVC. ⁽¹¹⁾

Particulate Exposure

Particle exposure leads to around 20,000 premature deaths in America each year. Inhaled particles that are less than 5 microns travel to the lower lung where the gas exchange occurs in the alveoli. The particle size of soot is approximately 2.5 microns or less and to offer some perspective on the size of these particles, a red blood cell is approximately 7 microns in size. 

Smoke particles--approx 2.5 microns (left); Red blood cells--approx 7 microns (right)

The smallest ultrafine particles are so minute they behave like gases, passing through the lungs and directly into the bloodstream. Ultrafine particles also travel up through the nose and, rather than passing down into the lungs, they are delivered directly into the brain and central nervous system via the olfactory nerve, bypassing the body’s protective blood/brain barrier. 

Safety Considerations

The importance of wearing proper protective equipment when working in or around fire debris or a fire damaged structure cannot be understated. Restorers should consider the following safety tips:

1. Establish a safety and site assessment protocol to determine what type of PPE should be worn. The highest level of respiratory protection should be considered.
2. Have all workers fit tested to ensure their respirators function properly.
3. Ventilate enclosed areas unless doing so will expose others to health hazards.
4. If workers experience any adverse health symptoms from exposure to smoke odors or soot, seek medical attention immediately. 

IF you experience a fire, let the certified and trained professionals handle the cleanup and deodorization.  Please feel free to call SERVPRO of SW Waukesha County with any fire or water needs. 262-542-0900. 

References

1. FIRE SCENE INVESTIGATION: A “CAUSE” FOR CONCERN? http://www.fireengineering.com/articles/print/volume-157/issue-6/features/fire-scene-investigation-a-cause-for-concern.html
2. It could take centuries for EPA to test all the unregulated chemicals under a new landmark bill By Mark Scialla: https://www.pbs.org/newshour/science/it-could-take-centuries-for-epa-to-test-all-the-unregulated-chemicals-under-a-new-landmark-bill
3. Characterization of fire Investigators Exposure During Fire Scene Examination By: Dennis L. Rogers – DuPage County Arson Task Force (page 19)
4. https://www.aph.gov.au/Parliamentary_Business/Committees/Senate/Education_Employment_and_Workplace_Relations/Completed_inquiries/2010-13/firefighters/report/c02 
5. https://www.ncbi.nlm.nih.gov/pubmed/10794914
6. Medical Effects: Dioxin and PCB’s From Wood Burning http://burningissues.org/carwww/medical_effects/dioxin.htm
7. World Health Organization http://www.who.int/mediacentre/factsheets/fs225/en/
8. A Guide to Living Plasticless http://plasticisrubbish.com/2008/06/03/dioxins-poisons-contamination/
9. Dioxins and their Effects on Human Health http://www.who.int/mediacentre/factsheets/fs225/en/
10. Dioxins Produced by Backyard Burning https://www.epa.gov/dioxin/dioxins-produced-backyardburning
11. and http://www.who.int/mediacentre/factsheets/fs225/en/
12. The Aspen institute https://www.aspeninstitute.org/programs/agent-orange-in-vietnamprogram/health-effects/